Comparing Kubota L3430HSTC vs Steiger Panther IV CS-325

This page provides a detailed comparison of the specifications for the Kubota L3430HSTC and the Steiger Panther IV CS-325. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Kubota L3430HSTC
View tractor
Steiger Panther IV CS-325
View tractor
Images
Engine
Engine - Manufacturer Kubota Caterpillar
Engine - Model L3430 HSTC 3406
Engine - Cooling Type Liquid (assumed based on industry standards, not explicitly provided) liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel (indirect injection is commonly associated with diesel) turbocharged diesel
Engine - Induction Type - -
Engine - Cylinders 3 6
Engine - Displacement (ci) 100.5 893
Engine - Bore (in) - 5.4
Engine - Stroke (in) - -
Engine - Rated RPM 2700 -
Engine - Power Output (hp) 33.6 (Net Power), 35.1 (Gross Power) 325
Transmission
Transmission - Type Hydrostatic power shift
Transmission - Forward Gears 3 range 10
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 115.2 (converted from 9.6 ft) -
Width (in) 60 (converted from 5 ft) -
Height (in) 87.6 (converted from 7.3 ft) -
Operating Weight (lb) 3637.7 -
Miscellaneous
Chassis 4x4 (MFWD) 4x4 articulated 4WD
Drive Type Four-wheel drive (4WD) 4WD
Steering Type Power articulated power
Coolant Capacity (qts) - -
Front Tire Diameter (in) - -
Front Tire Width (in) Unknown (specifies size but not width) -
Rear Tire Diameter (in) Unknown (specifies size but not diameter) -
Rear Tire Width (in) Unknown (specifies size but not width) -
Front/Rear Rim Diameter (in) - -
Tire Type Agricultural (assumed based on common use and size provided) -
Manufacture - End Year - -
Hitch Type Three-Point Hitch -
Hitch Category - -
Hitch Position Rear -
Hitch Capacity (lb) 2645.6 -
Operator Station Type Cab (assumed based on the "HSTC" in model name, suggesting hydrostatic transmission with a cab) -
Starter Type - 12 volts
PTO Type - -
PTO Speed 1 (rpm) - -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type - open center load sensing