This page provides a detailed comparison of the specifications for the Fendt 943 Vario MT and the International Harvester 3088. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Fendt 943 Vario MT
View tractor |
International Harvester 3088
View tractor |
|
|---|---|---|
| Images | ||
| Engine | ||
| Engine - Manufacturer | AGCO Power | International Harvester |
| Engine - Model | - | D358 |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 7 | 6 |
| Engine - Displacement (ci) | 598 | 358 |
| Engine - Bore (in) | 4.37 | 3.875 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 1450 | 2400 |
| Engine - Power Output (hp) | 425.1 | - |
| Transmission | ||
| Transmission - Type | Continuously-variable transmission (CVT) | Partial power shift |
| Transmission - Forward Gears | Infinite | 16 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 241.1 | 184 |
| Width (in) | 98.5 | 102 |
| Height (in) | 137.6 (cab), 133.9 (exhaust) | 112 (cab height only) |
| Operating Weight (lb) | 33443 to 33667 | 11940 |
| Miscellaneous | ||
| Chassis | - | 4x2 2WD |
| Drive Type | 4WD | 2WD |
| Steering Type | - | Power |
| Coolant Capacity (qts) | - | 24 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | - | - |
| Manufacture - End Year | - | - |
| Hitch Type | IVN/III (interpreted as Category IVN and III) | Category II |
| Hitch Category | - | - |
| Hitch Position | Rear | Rear |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | Cab | - |
| Starter Type | Electric Starter | Electric (based on engine starter volts) |
| PTO Type | 1000/1000E (1.75) | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | - |
| Hydraulic System Type | Closed center | Open center |
