This page provides a detailed comparison of the specifications for the International Harvester 1086 and the John Deere 20A Open Station. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
International Harvester 1086
View tractor |
John Deere 20A Open Station
View tractor |
|
|---|---|---|
| Images | ||
| Engine | ||
| Engine - Manufacturer | International Harvester | - |
| Engine - Model | DT414 | - |
| Engine - Cooling Type | Liquid-cooled | - |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | - |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 6 | 2 |
| Engine - Displacement (ci) | 414 | 58.3 |
| Engine - Bore (in) | 4.29 | - |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2400 | 3000 |
| Engine - Power Output (hp) | 130 | 21 |
| Transmission | ||
| Transmission - Type | Partial power shift | Gear |
| Transmission - Forward Gears | 16 | 6 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 168 (2WD) | - |
| Width (in) | 102 | - |
| Height (in) | 115 (with cab) | - |
| Operating Weight (lb) | 12715 (2WD) | - |
| Miscellaneous | ||
| Chassis | 4x2 2WD or 4x4 MFWD | - |
| Drive Type | 2WD or 4WD | - |
| Steering Type | Hydrostatic power | - |
| Coolant Capacity (qts) | 25 | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Ag | - |
| Manufacture - End Year | 1981 | - |
| Hitch Type | Three-Point Hitch | - |
| Hitch Category | - | - |
| Hitch Position | Rear | - |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | Cab standard | Open Station |
| Starter Type | Electric | - |
| PTO Type | Independent | - |
| PTO Speed 1 (rpm) | 540 | - |
| PTO Speed 2 (rpm) | 1000 | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Hydraulic disc | - |
| Hydraulic System Type | Open center | - |
