This page provides a detailed comparison of the specifications for the Fendt 208 Vario and the Steiger Panther IV CS-325. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Fendt 208 Vario
View tractor |
Steiger Panther IV CS-325
View tractor |
|
|---|---|---|
| Images | ||
| Engine | ||
| Engine - Manufacturer | AGCO Power | Caterpillar |
| Engine - Model | - | 3406 |
| Engine - Cooling Type | Liquid-cooled | liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | turbocharged diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 3 | 6 |
| Engine - Displacement (ci) | 201.4 | 893 |
| Engine - Bore (in) | 4.25 | 5.4 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2100 | - |
| Engine - Power Output (hp) | 80.5 (based on EC 97/98); Other ratings available but the highest reliable figure used | 325 |
| Transmission | ||
| Transmission - Type | Continuously Variable Transmission (CVT) | power shift |
| Transmission - Forward Gears | Infinite | 10 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 160.2 | - |
| Width (in) | 85.4 | - |
| Height (in) | 97.6 (with cab) | - |
| Operating Weight (lb) | 8356 | - |
| Miscellaneous | ||
| Chassis | 4x4 MFWD 4WD | 4x4 articulated 4WD |
| Drive Type | 4WD | 4WD |
| Steering Type | Power | articulated power |
| Coolant Capacity (qts) | - | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Standard tires (ag): Front: 320/70R24. Rear: 480/70R30 | - |
| Manufacture - End Year | - | - |
| Hitch Type | - | - |
| Hitch Category | - | - |
| Hitch Position | - | - |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | - | - |
| Starter Type | Electric | 12 volts |
| PTO Type | - | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | - |
| Hydraulic System Type | - | open center load sensing |
