This page provides a detailed comparison of the specifications for the Kubota B7610 and the Steiger Panther III ST-350. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Kubota B7610
View tractor |
Steiger Panther III ST-350
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | Kubota | Cummins |
| Engine - Model | D1105-E-D16 | VT-903 |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 3 | 8 |
| Engine - Displacement (ci) | 68.5 | 903 |
| Engine - Bore (in) | 3.071 | 5.5 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2600 | 2600 |
| Engine - Power Output (hp) | 24 | 350 |
| Transmission | ||
| Transmission - Type | Hydrostatic | Spicer SST 1010 |
| Transmission - Forward Gears | Infinite (2-range) | 20 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 91.3 | 252 |
| Width (in) | 46.1 | 96 |
| Height (in) | 77.2 | 155.8 |
| Operating Weight (lb) | 1367 | 26,700 |
| Miscellaneous | ||
| Chassis | 4x4 MFWD 4WD | 4x4 articulated 4WD |
| Drive Type | 4WD | 4WD |
| Steering Type | Power | Hydrostatic power |
| Coolant Capacity (qts) | 4 | 68 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Ag | Agricultural (assumed based on “Ag front/rear: 20.8-34”) |
| Manufacture - End Year | 2007 | - |
| Hitch Type | Three-Point Hitch | Category 3 |
| Hitch Category | - | - |
| Hitch Position | Rear | Rear |
| Hitch Capacity (lb) | 1,356 lbs | - |
| Operator Station Type | Open operator station with two-post ROPS | - |
| Starter Type | Electric | Electric (assumed based on “Engine - Starter volts: 12”) |
| PTO Type | Independent | - |
| PTO Speed 1 (rpm) | 540 | - |
| PTO Speed 2 (rpm) | 960 | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Wet disc type | - |
| Hydraulic System Type | Open center | Open Center |
