This page provides a detailed comparison of the specifications for the Steiger Panther III PTA-297 and the Steiger Turbo Tiger II ST-320. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Steiger Panther III PTA-297
View tractor |
Steiger Turbo Tiger II ST-320
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | Cummins | Cummins |
| Engine - Model | VT-903 | VT-903 |
| Engine - Cooling Type | liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 8 | 8 |
| Engine - Displacement (ci) | 903 | 903 |
| Engine - Bore (in) | 5.5 | 5.5 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2600 | 2600 |
| Engine - Power Output (hp) | 295 | 320 |
| Transmission | ||
| Transmission - Type | power shift | Manual |
| Transmission - Forward Gears | 8 | 10 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | 12 |
| Dimensions | ||
| Length (in) | 264.6 | 244 |
| Width (in) | 99 | 96 |
| Height (in) | - | 133.25 (cab height) |
| Operating Weight (lb) | 28975 | 24000 |
| Miscellaneous | ||
| Chassis | 4x4 articulated 4WD | 4x4 4WD |
| Drive Type | 4WD | 4WD |
| Steering Type | articulated power | - |
| Coolant Capacity (qts) | 68 | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | 24.5 | 30 |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Agricultural | Agriculture |
| Manufacture - End Year | - | - |
| Hitch Type | Three-Point Hitch (Category III assumed based on rear type III*) | - |
| Hitch Category | - | - |
| Hitch Position | Rear | - |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | - | Cab |
| Starter Type | Electric Starter (assuming from Engine - Starter volts: 12) | Electric Starter (implied by engine starter volts: 12) |
| PTO Type | - | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | - |
| Hydraulic System Type | open center load sensing | Open Center |
