This page provides a detailed comparison of the specifications for the Kubota BX23 and the Steiger Panther III PTA-297. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Kubota BX23
View tractor |
Steiger Panther III PTA-297
View tractor |
|
|---|---|---|
| Images | ||
| Engine | ||
| Engine - Manufacturer | Kubota | Cummins |
| Engine - Model | D905-E-BX | VT-903 |
| Engine - Cooling Type | Liquid-cooled | liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 3 | 8 |
| Engine - Displacement (ci) | 54.8 | 903 |
| Engine - Bore (in) | 2.83 | 5.5 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 3200 | 2600 |
| Engine - Power Output (hp) | 22 | 295 |
| Transmission | ||
| Transmission - Type | Hydrostatic | power shift |
| Transmission - Forward Gears | 2 | 8 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 167.7 | 264.6 |
| Width (in) | 45.1 | 99 |
| Height (in) | 85.8 | - |
| Operating Weight (lb) | 2698.5 | 28975 |
| Miscellaneous | ||
| Chassis | 4×4 MFWD 4WD | 4x4 articulated 4WD |
| Drive Type | 4WD | 4WD |
| Steering Type | Hydrostatic power | articulated power |
| Coolant Capacity (qts) | 3.7 | 68 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | 24.5 |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Lawn/turf/industrial | Agricultural |
| Manufacture - End Year | 2005 | - |
| Hitch Type | Three-Point Hitch | Three-Point Hitch (Category III assumed based on rear type III*) |
| Hitch Category | - | - |
| Hitch Position | - | Rear |
| Hitch Capacity (lb) | 684 | - |
| Operator Station Type | Open operator station with ROPS | - |
| Starter Type | Electric | Electric Starter (assuming from Engine - Starter volts: 12) |
| PTO Type | Independent | - |
| PTO Speed 1 (rpm) | 540 | - |
| PTO Speed 2 (rpm) | 2500 | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Wet disk | - |
| Hydraulic System Type | - | open center load sensing |
