Comparing Claas Axion 940 vs Steiger Cougar II ST-300

This page provides a detailed comparison of the specifications for the Claas Axion 940 and the Steiger Cougar II ST-300. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Claas Axion 940
View tractor
Steiger Cougar II ST-300
View tractor
Images No images available
Engine
Engine - Manufacturer FPT Caterpillar
Engine - Model - 3006T
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 6 6
Engine - Displacement (ci) 531.5 638
Engine - Bore (in) 4.61 4.75
Engine - Stroke (in) - -
Engine - Rated RPM 2150 2200
Engine - Power Output (hp) 374.1 300
Transmission
Transmission - Type Continuously variable transmission Manual
Transmission - Forward Gears Infinite 10
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 220.1 244
Width (in) - 96
Height (in) 135.8 133.25
Operating Weight (lb) 28792 22000
Miscellaneous
Chassis 4x4 MFWD 4WD 4x4 4WD
Drive Type 4WD 4WD
Steering Type Power -
Coolant Capacity (qts) - 60
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - 23.1
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Ag Agricultural
Manufacture - End Year - -
Hitch Type Category III/IV -
Hitch Category - -
Hitch Position - -
Hitch Capacity (lb) - -
Operator Station Type - Cab
Starter Type - Electric Starter (12 volts assumed based on starter voltage)
PTO Type - -
PTO Speed 1 (rpm) - -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type Load Sensing Open Center