This page provides a detailed comparison of the specifications for the CaseIH Farmall 110A and the Shibaura SE6340. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
CaseIH Farmall 110A
View tractor |
Shibaura SE6340
View tractor |
|
|---|---|---|
| Images | ||
| Engine | ||
| Engine - Manufacturer | FPT | Shibaura |
| Engine - Model | - | LER1103 |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | 8-valve | - |
| Engine - Fuel Type | Diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 4 | 3 |
| Engine - Displacement (ci) | 273.7 | 208.8 |
| Engine - Bore (in) | 4.094 | 4.331 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2200 | 2200 |
| Engine - Power Output (hp) | 110 | 63 |
| Transmission | ||
| Transmission - Type | Power Shuttle | Synchromesh |
| Transmission - Forward Gears | - | 16 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | - | 145.7 |
| Width (in) | - | 73.6 |
| Height (in) | - | 98 (Height of ROPS, as the tractor's tallest point) |
| Operating Weight (lb) | 8003 to 9348 | 6002 |
| Miscellaneous | ||
| Chassis | 4x2 2WD | - |
| Drive Type | 2WD | - |
| Steering Type | Power | - |
| Coolant Capacity (qts) | - | 18 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | - | Agricultural |
| Manufacture - End Year | - | - |
| Hitch Type | II | II (Three-Point Hitch) |
| Hitch Category | - | - |
| Hitch Position | Rear | Rear |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | - | ROPS |
| Starter Type | Electric | Electric |
| PTO Type | - | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | - |
| Hydraulic System Type | Open Center | Open center |
