This page provides a detailed comparison of the specifications for the John Deere 3530 and the Oliver 2155. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
John Deere 3530
View tractor |
Oliver 2155
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | John Deere | Minneapolis-Moline |
| Engine - Model | - | - |
| Engine - Cooling Type | Liquid-cooled | - |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | Diesel or LP gas, depending on the engine variant |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 6 | 6 |
| Engine - Displacement (ci) | 328.9 | 585 (for diesel), 504 (for LP gas) |
| Engine - Bore (in) | 4.016 | 4.75 (diesel), 4.625 (LP gas) |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2500 | 2200 (diesel), 1800 (LP gas) |
| Engine - Power Output (hp) | 105 | - |
| Transmission | ||
| Transmission - Type | Syncro-Range | Two-speed power shift |
| Transmission - Forward Gears | 8 | 10 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 162.2 | 168.5 |
| Width (in) | 89.8 | 95 |
| Height (in) | - | Unknown, highest known point is exhaust at 99 inches |
| Operating Weight (lb) | 12070 | 12050 |
| Miscellaneous | ||
| Chassis | 4x2 2WD | 4x2 2WD |
| Drive Type | 2WD | 2WD |
| Steering Type | Power | Power |
| Coolant Capacity (qts) | 21.1 | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | Unknown based on wheel size provided (7.50x18, 7.50x16) |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | Unknown based on wheel size provided (18.4x38, 20.8x38) |
| Front/Rear Rim Diameter (in) | - | 18 (front), 38 (rear) |
| Tire Type | Ag | Ag (Agricultural) |
| Manufacture - End Year | - | - |
| Hitch Type | Category II | Unknown, but rear type III/II is known which commonly indicates a three-point hitch |
| Hitch Category | - | - |
| Hitch Position | - | - |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | - | - |
| Starter Type | Electric (based on engine starter volts being 12) | Electric starter based on the starter volts information |
| PTO Type | - | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | - |
| Hydraulic System Type | Closed center | Open center |
