Comparing John Deere 8200 vs Oliver 1855

This page provides a detailed comparison of the specifications for the John Deere 8200 and the Oliver 1855. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

John Deere 8200
View tractor
Oliver 1855
View tractor
Images No images available
Engine
Engine - Manufacturer John Deere Oliver-Waukesha
Engine - Model - -
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel or Gasoline
Engine - Induction Type - -
Engine - Cylinders 6 6
Engine - Displacement (ci) 466 ci (7.6 L) 310 ci
Engine - Bore (in) 4.5625 (116 mm) 3.86 in
Engine - Stroke (in) - -
Engine - Rated RPM 2200 2400
Engine - Power Output (hp) 180 HP (182.5 PS; 134.2 kW) at 2,200 rpm 98 HP (diesel) or 92 HP (gasoline)
Transmission
Transmission - Type Full power shift Gear type with disc clutch or Partial power shift
Transmission - Forward Gears 16 6 (gear type) or 18 (Hydraul-Shift)
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 206.3 (524 cm) 159.5 in (2WD)
Width (in) - 80.625 in
Height (in) 120.1 (305 cm) 85.5 in (steering wheel)
Operating Weight (lb) 16457 to 18928 pounds 11,150 lbs
Miscellaneous
Chassis 4x2 2WD or 4x4 MFWD 4WD 4x2 2WD or 4x4 MFWD 4WD (optional)
Drive Type - 2WD/4WD
Steering Type Hydrostatic power Hydrostatic power
Coolant Capacity (qts) 28.8 US. qt (27.3 L) 20 qts
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Ag Ag
Manufacture - End Year 1999 1975
Hitch Type - Three-Point Hitch
Hitch Category - -
Hitch Position Rear Rear
Hitch Capacity (lb) 10,410 lbs (4720 kg) 4,000 lbs (Cat I/II) or 6,000 lbs (Cat II/III)
Operator Station Type CommandView Cab (standard) Open operator station. Two-post ROPS or cab (optional)
Starter Type Electric Electric
PTO Type Independent Independent
PTO Speed 1 (rpm) 1000 540
PTO Speed 2 (rpm) 540/1000 540/1000 (optional)
PTO Speed 3 (rpm) - 1000 (optional)
Brake Type Differential hydraulic wet disc Differential hydraulic disc
Hydraulic System Type Closed center pressure-flow compensated (PFC) Closed center