Comparing John Deere 8200 vs Oliver 1755

This page provides a detailed comparison of the specifications for the John Deere 8200 and the Oliver 1755. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

John Deere 8200
View tractor
Oliver 1755
View tractor
Images No images available
Engine
Engine - Manufacturer John Deere Waukesha-Oliver
Engine - Model - Waukesha-Oliver
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 6 6
Engine - Displacement (ci) 466 ci (7.6 L) 310 ci (5.1 L)
Engine - Bore (in) 4.5625 (116 mm) 3.86 in (98.0 mm)
Engine - Stroke (in) - -
Engine - Rated RPM 2200 2400
Engine - Power Output (hp) 180 HP (182.5 PS; 134.2 kW) at 2,200 rpm 91.03 HP
Transmission
Transmission - Type Full power shift Gear type or partial power shift
Transmission - Forward Gears 16 -
Transmission - Reverse Gears - -
Transmission - Total Gears - 6 forward and 2 reverse or 18 forward and 6 reverse
Dimensions
Length (in) 206.3 (524 cm) 159.5 inches (2WD); 152.375 inches (4WD)
Width (in) - 80.625 inches
Height (in) 120.1 (305 cm) 85.5 inches
Operating Weight (lb) 16457 to 18928 pounds 9,600 lbs
Miscellaneous
Chassis 4x2 2WD or 4x4 MFWD 4WD 4x2 2WD or 4x4 MFWD 4WD
Drive Type - 2WD/4WD
Steering Type Hydrostatic power Power
Coolant Capacity (qts) 28.8 US. qt (27.3 L) 20 US. qt, 16.6 Imp. qt.
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Ag -
Manufacture - End Year 1999 1975
Hitch Type - -
Hitch Category - -
Hitch Position Rear -
Hitch Capacity (lb) 10,410 lbs (4720 kg) Category II/I: 4,000 lbs; Category III/II: 6,000 lbs
Operator Station Type CommandView Cab (standard) Open operator station; Optional two-post ROPS and cab
Starter Type Electric Electric
PTO Type Independent Independent
PTO Speed 1 (rpm) 1000 540
PTO Speed 2 (rpm) 540/1000 1000
PTO Speed 3 (rpm) - -
Brake Type Differential hydraulic wet disc Differential hydraulic dry disc
Hydraulic System Type Closed center pressure-flow compensated (PFC) Closed center