Comparing John Deere 7230 vs Massey Ferguson 2745

This page provides a detailed comparison of the specifications for the John Deere 7230 and the Massey Ferguson 2745. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

John Deere 7230
View tractor
Massey Ferguson 2745
View tractor
Images
Engine
Engine - Manufacturer John Deere Perkins
Engine - Model 6068HL280 or 6068HL282 8.54
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 6 8
Engine - Displacement (ci) 414.4 ci 539 ci
Engine - Bore (in) 4.19 in 4.25 inches
Engine - Stroke (in) - -
Engine - Rated RPM 2300 2600 RPM
Engine - Power Output (hp) 126.93 hp 140 HP
Transmission
Transmission - Type Selective gear fixed ratio with partial (4) range operator controlled power shift (AutoQuad-Plus) -
Transmission - Forward Gears 24 24
Transmission - Reverse Gears - -
Transmission - Total Gears 48 -
Dimensions
Length (in) 187 in 181.6 inches
Width (in) 65.4 in 91.6 inches (standard axle)
Height (in) 115 in (ROPS) / 114.2 in (Cab) 112 inches (cab)
Operating Weight (lb) 12930 lbs (4WD Operating weight) 15190 lbs
Miscellaneous
Chassis 4x2 2WD or 4x4 MFWD 4WD (optional) 4x2 2WD
Drive Type 2WD or 4WD (based on chassis specification) 2WD
Steering Type Hydrostatic power Hydrostatic power
Coolant Capacity (qts) 32.8 qts (ROPS) / 35.5 qts (Cab) 50 qts
Front Tire Diameter (in) - -
Front Tire Width (in) 15.0 in -
Rear Tire Diameter (in) 71.3 in -
Rear Tire Width (in) 18.9 in -
Front/Rear Rim Diameter (in) 30 in / 42 in -
Tire Type Ag (agricultural) Ag
Manufacture - End Year 2017 1983
Hitch Type Category II Three-Point Hitch
Hitch Category - -
Hitch Position Rear Rear
Hitch Capacity (lb) 18196 lbs -
Operator Station Type Two-post Roll-Gard ROPS or Cab (optional) Cab standard with air-conditioning or four-post ROPS
Starter Type Electric Electric
PTO Type Independent Independent with hydraulic clutch
PTO Speed 1 (rpm) 540 540 rpm
PTO Speed 2 (rpm) 1000 1000 rpm
PTO Speed 3 (rpm) 540E (optional) -
Brake Type Differential hydraulic wet disc Hydraulic wet disc
Hydraulic System Type Constant flow load sensing or closed-center load sensing (optional for ROPS) Open Center