Comparing John Deere 655 vs New Holland Workmaster 55

This page provides a detailed comparison of the specifications for the John Deere 655 and the New Holland Workmaster 55. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

John Deere 655
View tractor
New Holland Workmaster 55
View tractor
Images No images available
Engine
Engine - Manufacturer Yanmar ISM Diesel
Engine - Model 3TN66UJ -
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel No. 2 Diesel
Engine - Induction Type - -
Engine - Cylinders 3 4
Engine - Displacement (ci) 40.2 ci 135 cu·in
Engine - Bore (in) 2.598 3.307
Engine - Stroke (in) - -
Engine - Rated RPM 3200 2700
Engine - Power Output (hp) 16 hp 49.36 hp
Transmission
Transmission - Type Hydrostatic -
Transmission - Forward Gears Infinite (2-range) -
Transmission - Reverse Gears - -
Transmission - Total Gears - 8 forward and 8 reverse (2WD), 12 forward and reverse (4WD)
Dimensions
Length (in) 100.8 in 130.7 (2WD), 133.5 (4WD)
Width (in) 47.6 in 67.3
Height (in) 74 in 95.7
Operating Weight (lb) 1565 lbs (2WD) / 1635 lbs (4WD) 4385 (Unladen tractor mass)
Miscellaneous
Chassis 4x2 2WD or 4x4 MFWD 4WD -
Drive Type - -
Steering Type Hydrostatic power Hydrostatic power
Coolant Capacity (qts) 4 qts -
Front Tire Diameter (in) - -
Front Tire Width (in) Unknown (Width not provided) -
Rear Tire Diameter (in) Unknown (7.2 for 2WD/4WD size not provided) -
Rear Tire Width (in) Unknown (Width not provided) -
Front/Rear Rim Diameter (in) - -
Tire Type Ag: agricultural, Lawn/turf: unknown -
Manufacture - End Year 1990 2014
Hitch Type Three-Point Hitch Unknown (Category II/I suggests standard three-point hitch)
Hitch Category - -
Hitch Position - -
Hitch Capacity (lb) 794 lbs 2580 lbs (lift capacity at ends)
Operator Station Type Open operator station with two-post ROPS. Optional canopy. Two-post foldable ROPS
Starter Type Electric Electric
PTO Type Independent Independent
PTO Speed 1 (rpm) 540 rpm 540
PTO Speed 2 (rpm) 2100 rpm -
PTO Speed 3 (rpm) - -
Brake Type Differential hydraulic wet disc Differential mechanical wet disc
Hydraulic System Type Open center Direct engine drive