Comparing International Harvester Farmall vs John Deere 2510

This page provides a detailed comparison of the specifications for the International Harvester Farmall and the John Deere 2510. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

International Harvester Farmall
View tractor
John Deere 2510
View tractor
Images No images available
Engine
Engine - Manufacturer International Harvester John Deere
Engine - Model - -
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Gasoline Gasoline / Diesel
Engine - Induction Type - -
Engine - Cylinders 4 4
Engine - Displacement (ci) 220.9 180.4 (gasoline) / 202.7 (diesel)
Engine - Bore (in) 3.75 3.86
Engine - Stroke (in) - -
Engine - Rated RPM 1200 2500
Engine - Power Output (hp) - -
Transmission
Transmission - Type - Partially synchronized / Full power shift
Transmission - Forward Gears 3 8
Transmission - Reverse Gears - -
Transmission - Total Gears 4 -
Dimensions
Length (in) 136 139.8
Width (in) 86 85.8
Height (in) 67 74
Operating Weight (lb) 4,000 6200 to 6745
Miscellaneous
Chassis 4x2 2WD 4x2 2WD
Drive Type 2WD 2WD
Steering Type Manual Power
Coolant Capacity (qts) 36 14
Front Tire Diameter (in) - -
Front Tire Width (in) 4 (Standard) / 8 (Lawn/turf) -
Rear Tire Diameter (in) 40 (Standard) / 40 (Lawn/turf) Unknown (13.6-38 is the tire model, not diameter)
Rear Tire Width (in) 6 (Standard) / 16 (Lawn/turf) -
Front/Rear Rim Diameter (in) - -
Tire Type Steel Ag
Manufacture - End Year - 1968
Hitch Type - Three-Point Hitch
Hitch Category - -
Hitch Position Rear Rear
Hitch Capacity (lb) - -
Operator Station Type - Open operator station
Starter Type Hand Crank Electric
PTO Type - Optional front / Independent rear
PTO Speed 1 (rpm) - 540 / 1000
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - Hydraulic wet disc
Hydraulic System Type - Closed center constant pressure