Comparing Farmall 856 vs International Harvester 766

This page provides a detailed comparison of the specifications for the Farmall 856 and the International Harvester 766. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Farmall 856
View tractor
International Harvester 766
View tractor
Images No images available No images available
Engine
Engine - Manufacturer International Harvester International Harvester
Engine - Model D-407 / C-301 C291 / D360
Engine - Cooling Type Liquid-cooled Liquid-cooled / Air-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel / Gasoline / LP-gas Gasoline / Diesel
Engine - Induction Type - -
Engine - Cylinders 6 6
Engine - Displacement (ci) 406.9 / 301.0 391 / 360
Engine - Bore (in) 4.33 / 3.82 3.74 / 3.875
Engine - Stroke (in) - -
Engine - Rated RPM 2400 2400
Engine - Power Output (hp) 95 -
Transmission
Transmission - Type Sliding gear with dry disc clutch / Two-speed power shift with dry disc clutch Sliding gear / Partial power shift
Transmission - Forward Gears 8 or 16 16
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 163.8 165
Width (in) 91.7 98
Height (in) - 105
Operating Weight (lb) 10290 10300
Miscellaneous
Chassis - 4x2 2WD
Drive Type 2WD or MFWD 2WD
Steering Type Hydrostatic power Hydrostatic Power
Coolant Capacity (qts) 24 / 21 / 21.5 -
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Ag Agricultural
Manufacture - End Year 1971 1976
Hitch Type IH Fast Hitch Three-Point Hitch
Hitch Category - -
Hitch Position Rear Rear
Hitch Capacity (lb) - -
Operator Station Type Open / Cab (optional) Open / Cab (optional)
Starter Type Electric Electric
PTO Type Independent Independent
PTO Speed 1 (rpm) 1000 540
PTO Speed 2 (rpm) 540/1000 1000
PTO Speed 3 (rpm) - -
Brake Type Independent hydraulic disc Hydraulic Dry Disc
Hydraulic System Type - Open center