This page provides a detailed comparison of the specifications for the Deutz-Fahr 4046E Keyline and the International Harvester 724. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Deutz-Fahr 4046E Keyline
View tractor |
International Harvester 724
View tractor |
|
|---|---|---|
| Images | ||
| Engine | ||
| Engine - Manufacturer | Simpson | International Harvester |
| Engine - Model | SJ327E | D-239 |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 3 | 4 |
| Engine - Displacement (ci) | 164.8 | 238.65 |
| Engine - Bore (in) | 3.74 | 3.875 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2200 | 2200 |
| Engine - Power Output (hp) | 44.3 | 67 |
| Transmission | ||
| Transmission - Type | Gear | Partially synchronized / Partial power shift |
| Transmission - Forward Gears | 8 (standard), 12 (with creeper) | 12 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 139.8 | 131.6 |
| Width (in) | 70.9 | 71.5 |
| Height (in) | 64.3 | 62 |
| Operating Weight (lb) | 4630 (2WD), 5512 (4WD) | 6262 (2WD variant) |
| Miscellaneous | ||
| Chassis | 4x2 2WD | 4x2 2WD |
| Drive Type | 2WD | 2WD |
| Steering Type | Power | Manual |
| Coolant Capacity (qts) | - | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | - | Standard tires (ag) |
| Manufacture - End Year | Ongoing | - |
| Hitch Type | II | Category II |
| Hitch Category | - | - |
| Hitch Position | Rear | Rear |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | Open ROPS | - |
| Starter Type | Electric | - |
| PTO Type | - | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | - |
| Hydraulic System Type | Open Center | - |
