Comparing CaseIH Farmall 110U vs International Harvester 434

This page provides a detailed comparison of the specifications for the CaseIH Farmall 110U and the International Harvester 434. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

CaseIH Farmall 110U
View tractor
International Harvester 434
View tractor
Images No images available
Engine
Engine - Manufacturer FPT International Harvester
Engine - Model - -
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel and Gasoline
Engine - Induction Type - -
Engine - Cylinders 4 4
Engine - Displacement (ci) 207 154
Engine - Bore (in) 3.9 3.5
Engine - Stroke (in) - -
Engine - Rated RPM 2300 2000
Engine - Power Output (hp) 107 43
Transmission
Transmission - Type 4-speed power shift Gear
Transmission - Forward Gears 16 8
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 165 118.11
Width (in) 88.5 -
Height (in) 107 (Cab) 87.4
Operating Weight (lb) 10031 4630
Miscellaneous
Chassis 4x4 MFWD 4WD 4x2 2WD
Drive Type 4WD 2WD
Steering Type Power Manual
Coolant Capacity (qts) - -
Front Tire Diameter (in) - -
Front Tire Width (in) - 7.5
Rear Tire Diameter (in) - 32
Rear Tire Width (in) - 12.4
Front/Rear Rim Diameter (in) - -
Tire Type Radial Ag
Manufacture - End Year - -
Hitch Type II -
Hitch Category - -
Hitch Position Rear -
Hitch Capacity (lb) - -
Operator Station Type Cab -
Starter Type Electric Electric starter (based on "Engine - Starter volts: 12")
PTO Type - -
PTO Speed 1 (rpm) - -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type Open Center -