This page provides a detailed comparison of the specifications for the CaseIH Farmall 25A and the International Harvester 2444. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
CaseIH Farmall 25A
View tractor |
International Harvester 2444
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | Mitsubishi | International Harvester |
| Engine - Model | - | C-153 (Gasoline), BD-154 (Diesel) |
| Engine - Cooling Type | liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | diesel | Gasoline, Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 3 | 4 |
| Engine - Displacement (ci) | 80.4 | 152.0 (Gasoline), 154.0 (Diesel) |
| Engine - Bore (in) | 3.07 | 3.39 (Gasoline), 3.5 (Diesel) |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2500 | 2200 (Gasoline), 2000 (Diesel) |
| Engine - Power Output (hp) | 24.6 | 47 (Gasoline), 43.4 (Diesel) |
| Transmission | ||
| Transmission - Type | sync shuttle / hydrostatic | Gear type, Manual shuttle |
| Transmission - Forward Gears | 12 | 8 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 117.2 | - |
| Width (in) | - | - |
| Height (in) | 88.2 | - |
| Operating Weight (lb) | 2469 | - |
| Miscellaneous | ||
| Chassis | - | 4x2 2WD |
| Drive Type | - | 2WD |
| Steering Type | - | Power |
| Coolant Capacity (qts) | - | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | - | Agricultural (implied by Ag) |
| Manufacture - End Year | - | 1971 |
| Hitch Type | - | - |
| Hitch Category | - | - |
| Hitch Position | - | - |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | - | Open |
| Starter Type | Electric Starter | Electric |
| PTO Type | 540 (1.375) | Independent (optional), Transmission (optional) |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | - |
| Hydraulic System Type | Open Center | - |
