This page provides a detailed comparison of the specifications for the CaseIH Farmall 25A and the International Harvester 1466. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
CaseIH Farmall 25A
View tractor |
International Harvester 1466
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | Mitsubishi | International Harvester |
| Engine - Model | - | DT-436 |
| Engine - Cooling Type | liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 3 | 6 |
| Engine - Displacement (ci) | 80.4 | 436 |
| Engine - Bore (in) | 3.07 | 4.29 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2500 | 2400 (early) |
| Engine - Power Output (hp) | 24.6 | 147 |
| Transmission | ||
| Transmission - Type | sync shuttle / hydrostatic | Gear type or two-speed power shift (Torque Amplifier) |
| Transmission - Forward Gears | 12 | 8 or 16 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 117.2 | 167.7 |
| Width (in) | - | 97.6 |
| Height (in) | 88.2 | 110.6 |
| Operating Weight (lb) | 2469 | 13480 |
| Miscellaneous | ||
| Chassis | - | - |
| Drive Type | - | 2WD or MFWD 4WD |
| Steering Type | - | Hydrostatic power |
| Coolant Capacity (qts) | - | 27.1 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | - | Agricultural |
| Manufacture - End Year | - | 1976 |
| Hitch Type | - | Three-Point Hitch |
| Hitch Category | - | - |
| Hitch Position | - | Rear |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | - | Open operator station or Cab with heat and A/C (optional) |
| Starter Type | Electric Starter | Electric |
| PTO Type | 540 (1.375) | Independent 1000 |
| PTO Speed 1 (rpm) | - | 540 |
| PTO Speed 2 (rpm) | - | 1000 |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | Independent hydrostatic dry disc |
| Hydraulic System Type | Open Center | Open center |
