Comparing IMT 555 vs Leyland 285

This page provides a detailed comparison of the specifications for the IMT 555 and the Leyland 285. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

IMT 555
View tractor
Leyland 285
View tractor
Images
Engine
Engine - Manufacturer IMT Leyland
Engine - Model IM-034 -
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 4 6
Engine - Displacement (ci) 203.2 344.7
Engine - Bore (in) 3.6 3.858
Engine - Stroke (in) - -
Engine - Rated RPM 2000 2100
Engine - Power Output (hp) 50 85
Transmission
Transmission - Type Gear Synchromesh Gear
Transmission - Forward Gears 6 9
Transmission - Reverse Gears - -
Transmission - Total Gears 8 -
Dimensions
Length (in) 137.2 -
Width (in) 66.9 -
Height (in) 88.6 (assuming this is the overall height to the top of exhaust as it is the taller measurement) -
Operating Weight (lb) 4200 8000
Miscellaneous
Chassis 4x2 2WD 4x2 2WD
Drive Type 2WD 2WD
Steering Type Manual Power
Coolant Capacity (qts) 12.7 -
Front Tire Diameter (in) - -
Front Tire Width (in) - 7.5
Rear Tire Diameter (in) - 34
Rear Tire Width (in) - 14
Front/Rear Rim Diameter (in) - -
Tire Type - Agricultural
Manufacture - End Year - -
Hitch Type Three-Point Hitch (inferred from "Rear Type: II") Category II
Hitch Category - -
Hitch Position - Rear
Hitch Capacity (lb) - -
Operator Station Type - -
Starter Type Electric Electric
PTO Type - -
PTO Speed 1 (rpm) - -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type - Open Center