This page provides a detailed comparison of the specifications for the Fendt 936 Vario and the John Deere 6310SE. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Fendt 936 Vario
View tractor |
John Deere 6310SE
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | Deutz | John Deere |
| Engine - Model | 2013 L06 4V | - |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | 24-valve | - |
| Engine - Fuel Type | Diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 6 | 4 |
| Engine - Displacement (ci) | 435.8 | 276.4 |
| Engine - Bore (in) | 4.25 | 4.19 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2200 | 2300 |
| Engine - Power Output (hp) | 355 (EC 97/98), 330 (ECE R24) | 100 |
| Transmission | ||
| Transmission - Type | CVT | Synchronized |
| Transmission - Forward Gears | Infinite (2-range) | 12 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 222.6 | 163.2 |
| Width (in) | 108.3 | 85.8 |
| Height (in) | 130.8 | 104.1 |
| Operating Weight (lb) | 22,840 | 8924 |
| Miscellaneous | ||
| Chassis | 4x4 MFWD 4WD | 4x2 2WD |
| Drive Type | 4WD | 2WD |
| Steering Type | Power | Power |
| Coolant Capacity (qts) | - | 14.3 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | - | Agricultural |
| Manufacture - End Year | - | - |
| Hitch Type | Rear Type IV (Category 3 specification assumed based on Rear Type IV data) | - |
| Hitch Category | - | - |
| Hitch Position | Rear | - |
| Hitch Capacity (lb) | Up to 33,000 lbs maximum capacity inferred from max capacity data | - |
| Operator Station Type | - | - |
| Starter Type | - | Electric |
| PTO Type | - | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | - |
| Hydraulic System Type | Load sensing | - |
