This page provides a detailed comparison of the specifications for the Deutz-Allis 8010 and the John Deere 6600. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Deutz-Allis 8010
View tractor |
John Deere 6600
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | Allis Chalmers | John Deere |
| Engine - Model | 649T | 6068 |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 6 | 6 |
| Engine - Displacement (ci) | 301 | 359 |
| Engine - Bore (in) | 3.875 | 4.17 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2300 | 2100 |
| Engine - Power Output (hp) | - | 110 |
| Transmission | ||
| Transmission - Type | Partial power shift | Partial power shift |
| Transmission - Forward Gears | 16 | 20 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 187 | 177.2 |
| Width (in) | 92.6 | 90.9 |
| Height (in) | 114 | 110.6 |
| Operating Weight (lb) | 12630 to 13600 | 10250 |
| Miscellaneous | ||
| Chassis | 4x2 | 4x4 MFWD 4WD |
| Drive Type | 2WD | MFWD 4WD |
| Steering Type | Hydrostatic power | Power |
| Coolant Capacity (qts) | 26 | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Ag | Ag |
| Manufacture - End Year | - | 1997 |
| Hitch Type | Type II | - |
| Hitch Category | - | - |
| Hitch Position | - | - |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | - | Cab (standard) with air-conditioning |
| Starter Type | Electric | Electric |
| PTO Type | - | Independent |
| PTO Speed 1 (rpm) | - | 540 |
| PTO Speed 2 (rpm) | - | 1000 |
| PTO Speed 3 (rpm) | - | 540E (assumed based on standard John Deere options) |
| Brake Type | - | Wet disc |
| Hydraulic System Type | Load-sensitive | Closed center |
