Comparing AGCO LT85A vs Challenger MT875E

This page provides a detailed comparison of the specifications for the AGCO LT85A and the Challenger MT875E. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

AGCO LT85A
View tractor
Challenger MT875E
View tractor
Images No images available
Engine
Engine - Manufacturer Sisu Diesel AGCO
Engine - Model 44CTA -
Engine - Cooling Type Liquid-cooled liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration 16-valve -
Engine - Fuel Type Diesel diesel
Engine - Induction Type - -
Engine - Cylinders 4 12
Engine - Displacement (ci) 268 1027.5
Engine - Bore (in) 4.252 4.37
Engine - Stroke (in) - -
Engine - Rated RPM 2200 1500
Engine - Power Output (hp) 110.1 561.47
Transmission
Transmission - Type Partial power shift full power shift
Transmission - Forward Gears 16 16
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 172 -
Width (in) 79.3 100.0 to 120.0
Height (in) 109 -
Operating Weight (lb) 10605 44265
Miscellaneous
Chassis 4x2 2WD / Front Wheel Assist (FWA) Tracked
Drive Type 2WD / FWA Transmission selective gear fixed ratio with full range operator controlled power shift
Steering Type Power power differential
Coolant Capacity (qts) - -
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) 30 -
Rear Tire Width (in) 18.4 -
Front/Rear Rim Diameter (in) - -
Tire Type Standard tires (ag) for 2WD and 4WD specified; various optional sizes provided Tracked
Manufacture - End Year - -
Hitch Type Category II three-point hitch Drawbar
Hitch Category - -
Hitch Position Rear -
Hitch Capacity (lb) - -
Operator Station Type ROPS (Foldable) and Cab available -
Starter Type Electric Electric Starter
PTO Type - -
PTO Speed 1 (rpm) - -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type Open center and Closed center options available closed center pressure flow compensated; Standard Pump Delivery Rate: 58.3 GPM (220.8 l/min) at minimum pressure and rated engine speed; Hydraulic Power: 90.8 HP (67.7 kW) at delivery pressure of 2826 psi (195 bar); High Flow Pump Delivery Rate: 86.6 GPM (327.7 l/min) and a hydraulic power of 133.8 HP (99.8 kW)