This page provides a detailed comparison of the specifications for the CaseIH Farmall 25A and the International Harvester 1466. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
CaseIH Farmall 25A
View tractor |
International Harvester 1466
View tractor |
|
---|---|---|
Images | No images available | |
Engine | ||
Engine - Manufacturer | Mitsubishi | International Harvester |
Engine - Model | - | DT-436 |
Engine - Cooling Type | liquid-cooled | Liquid-cooled |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | - | - |
Engine - Fuel Type | diesel | Diesel |
Engine - Induction Type | - | - |
Engine - Cylinders | 3 | 6 |
Engine - Displacement (ci) | 80.4 | 436 |
Engine - Bore (in) | 3.07 | 4.29 |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 2500 | 2400 (early) |
Engine - Power Output (hp) | 24.6 | 147 |
Transmission | ||
Transmission - Type | sync shuttle / hydrostatic | Gear type or two-speed power shift (Torque Amplifier) |
Transmission - Forward Gears | 12 | 8 or 16 |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | - | - |
Dimensions | ||
Length (in) | 117.2 | 167.7 |
Width (in) | - | 97.6 |
Height (in) | 88.2 | 110.6 |
Operating Weight (lb) | 2469 | 13480 |
Miscellaneous | ||
Chassis | - | - |
Drive Type | - | 2WD or MFWD 4WD |
Steering Type | - | Hydrostatic power |
Coolant Capacity (qts) | - | 27.1 |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | - |
Rear Tire Diameter (in) | - | - |
Rear Tire Width (in) | - | - |
Front/Rear Rim Diameter (in) | - | - |
Tire Type | - | Agricultural |
Manufacture - End Year | - | 1976 |
Hitch Type | - | Three-Point Hitch |
Hitch Category | - | - |
Hitch Position | - | Rear |
Hitch Capacity (lb) | - | - |
Operator Station Type | - | Open operator station or Cab with heat and A/C (optional) |
Starter Type | Electric Starter | Electric |
PTO Type | 540 (1.375) | Independent 1000 |
PTO Speed 1 (rpm) | - | 540 |
PTO Speed 2 (rpm) | - | 1000 |
PTO Speed 3 (rpm) | - | - |
Brake Type | - | Independent hydrostatic dry disc |
Hydraulic System Type | Open Center | Open center |