This page provides a detailed comparison of the specifications for the Allis Chalmers 5050 and the CaseIH Farmall 110A. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Allis Chalmers 5050
View tractor |
CaseIH Farmall 110A
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | Fiat | FPT |
| Engine - Model | Fiat | - |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | 8-valve |
| Engine - Fuel Type | Diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 3 | 4 |
| Engine - Displacement (ci) | 167.8 | 273.7 |
| Engine - Bore (in) | 4.055 | 4.094 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2700 | 2200 |
| Engine - Power Output (hp) | 50 | 110 |
| Transmission | ||
| Transmission - Type | Partially synchronized | Power Shuttle |
| Transmission - Forward Gears | 8 | - |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 119.3 (2WD), 124.7 (4WD) | - |
| Width (in) | 67 | - |
| Height (in) | 59.3 (2WD), 60.3 (4WD) | - |
| Operating Weight (lb) | 4410 (Operating), 7690 (Ballasted) | 8003 to 9348 |
| Miscellaneous | ||
| Chassis | 4x2 2WD or 4x4 MFWD 4WD | 4x2 2WD |
| Drive Type | 2WD and 4WD options available | 2WD |
| Steering Type | Power assist | Power |
| Coolant Capacity (qts) | 14.25 | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Ag (Agricultural) | - |
| Manufacture - End Year | 1983 | - |
| Hitch Type | II/I | II |
| Hitch Category | - | - |
| Hitch Position | Rear | Rear |
| Hitch Capacity (lb) | 3,197 lbs | - |
| Operator Station Type | Open operator station (ROPS and canopy optional) | - |
| Starter Type | Electric | Electric |
| PTO Type | Independent | - |
| PTO Speed 1 (rpm) | 540 | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Differential mechanical contracting band | - |
| Hydraulic System Type | Open center | Open Center |
