This page provides a detailed comparison of the specifications for the Allis Chalmers 185 and the John Deere 3420. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
Allis Chalmers 185
View tractor |
John Deere 3420
View tractor |
|
---|---|---|
Images | No images available | |
Engine | ||
Engine - Manufacturer | Allis-Chalmers | John Deere |
Engine - Model | Allis-Chalmers | - |
Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | - | - |
Engine - Fuel Type | Diesel | Diesel |
Engine - Induction Type | - | - |
Engine - Cylinders | 6 | 6 |
Engine - Displacement (ci) | 301 | 302.7 |
Engine - Bore (in) | 3.875 | 4.016 |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 2200 | 2500 |
Engine - Power Output (hp) | - | 77 |
Transmission | ||
Transmission - Type | Partial power shift | Syncro-Range |
Transmission - Forward Gears | 8 | 8 |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | - | - |
Dimensions | ||
Length (in) | 158 | 161 |
Width (in) | 76.5 | - |
Height (in) | - | 88.2 (height to exhaust) |
Operating Weight (lb) | 6710 | 7668 |
Miscellaneous | ||
Chassis | 4x2 2WD | 4x2 2WD |
Drive Type | 2WD | 2WD |
Steering Type | Hydrostatic power | Power |
Coolant Capacity (qts) | 17 | - |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | - |
Rear Tire Diameter (in) | - | 34 (based on tire size 18.4x34) |
Rear Tire Width (in) | - | - |
Front/Rear Rim Diameter (in) | - | - |
Tire Type | Ag | Agricultural |
Manufacture - End Year | 1981 | - |
Hitch Type | II (Three-Point Hitch) | - |
Hitch Category | - | - |
Hitch Position | Rear | Rear |
Hitch Capacity (lb) | - | - |
Operator Station Type | Open operator station, Two-post ROPS and canopy (optional) | - |
Starter Type | Electric | Electric (based on starter volts of 12) |
PTO Type | Continuous | - |
PTO Speed 1 (rpm) | 540 | - |
PTO Speed 2 (rpm) | 1000 | - |
PTO Speed 3 (rpm) | - | - |
Brake Type | Differential mechanical band and disc | - |
Hydraulic System Type | Open center | Closed Center |