This page provides a detailed comparison of the specifications for the Agco ST52a and the Hurlimann H-305 XE. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
Agco ST52a
View tractor |
Hurlimann H-305 XE
View tractor |
|
---|---|---|
Images | ||
Engine | ||
Engine - Manufacturer | - | SAME |
Engine - Model | - | 1000.3 A |
Engine - Cooling Type | - | Air-cooled |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | - | - |
Engine - Fuel Type | - | Diesel |
Engine - Induction Type | - | - |
Engine - Cylinders | - | 3 |
Engine - Displacement (ci) | 173.9 | 183.1 |
Engine - Bore (in) | - | 4.134 |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 2600 | 2350 |
Engine - Power Output (hp) | 52.1 | 49.6 |
Transmission | ||
Transmission - Type | 8x8 synchro shuttle | Mechanical shuttle / Creeper |
Transmission - Forward Gears | 8 | 24 |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | - | - |
Dimensions | ||
Length (in) | 130.8 | 133.1 |
Width (in) | 66 | 64.6 |
Height (in) | 91.2 (converted from 7.6 ft) | - |
Operating Weight (lb) | 3494.4 | 4277 (2WD) / 4740 (4WD) |
Miscellaneous | ||
Chassis | - | 4x2 2WD |
Drive Type | - | 2WD |
Steering Type | - | Power |
Coolant Capacity (qts) | - | - |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | - |
Rear Tire Diameter (in) | - | - |
Rear Tire Width (in) | - | - |
Front/Rear Rim Diameter (in) | - | - |
Tire Type | Ag R1 | Ag (Agricultural) |
Manufacture - End Year | - | - |
Hitch Type | Cat I | - |
Hitch Category | - | - |
Hitch Position | Rear | - |
Hitch Capacity (lb) | 3086.5 | - |
Operator Station Type | - | - |
Starter Type | - | Electric |
PTO Type | - | - |
PTO Speed 1 (rpm) | - | - |
PTO Speed 2 (rpm) | - | - |
PTO Speed 3 (rpm) | - | - |
Brake Type | - | - |
Hydraulic System Type | Unknown, pump flow capacity is 12.6 gal/min | - |