Massey Ferguson 210

Last Updated: June 2024

Overview

The Massey Ferguson 210 is a utility tractor powered by a 25 hp (18.6 kW) Toyosha P126 diesel engine. It features a liquid-cooled 2-cylinder engine with indirect injection fueling and a displacement of 77.1 cubic inches. The transmission is a gear type with 12 forward and 3 reverse gears. It is equipped with a 540 rpm rear PTO and has an open center hydraulic system. Tire sizes and dimensions vary based on the configuration as either 2WD or 4WD versions are available. Engine details indicate the use of glow plugs for pre-heating, compression ratio at 23:1, and a peak torque of 54 lb-ft at 1800 RPM. The operational weight range of this model is between 2325 to 3180 pounds. The specific years of manufacture for the Massey Ferguson 210 are not provided in the available data.
Show more...

Key Specifications

Category: Utility

Power Output: 25

Transmission: gear

Operating Weight: 2325 to 3180

Fuel Type: diesel

Massey Ferguson 210 vs. Similar Tractors

Power Output
Below Average
Greater than 18% of similar tractors.
Operating Weight
Above Average
Greater than 82% of similar tractors.

Technical Specifications

Engine

Manufacturer
Toyosha
Model
P126
Cooling Type
liquid-cooled
Cylinder Orientation
-
Valve Configuration
-
Fuel Type
diesel
Induction Type
indirect injection
Cylinders
2
Displacement (ci)
77.1
Bore (in)
3.62
Stroke (in)
3.74
Rated RPM
2500
Power Output (hp)
25

Transmission

Type
gear
Forward Gears
12
Reverse Gears
3
Total Gears
-

Dimensions

Length (in)
-
Width (in)
-
Height (in)
-
Operating Weight (lb)
2325 to 3180

Power Take-Off (PTO)

PTO Type
540 (1.375)
PTO Speed 1 (rpm)
-
PTO Speed 2 (rpm)
-
PTO Speed 3 (rpm)
-

Miscellaneous

Chassis
-
Drive Type
-
Steering Type
-
Coolant Capacity (qts)
5.3
Front Tire Diameter (in)
-
Front Tire Width (in)
-
Rear Tire Diameter (in)
-
Rear Tire Width (in)
-
Front/Rear Rim Diameter (in)
-
Tire Type
-
Manufacture - End Year
-
Hitch Type
Rear Type: I
Hitch Category
-
Hitch Position
Rear
Hitch Capacity (lb)
-
Operator Station Type
-
Starter Type
-
Brake Type
-
Hydraulic System Type
open center