Farmall C

Last Updated: June 2024

Overview

The Farmall C tractor, manufactured by International Harvester between 1948 and 1951, is a two-wheel drive row-crop type designed for general farming. It features a manual steering system and manual contracting band brakes. The tractor operates with a 23 horsepower International Harvester C113 four-cylinder gasoline engine that has a displacement of 113.1 cubic inches and liquid cooling system. Equipped with a 4-speed sliding gear transmission offering 4 forward and 1 reverse gears, it provides adequate range for a variety of tasks. This model comes with an open operator station and supports a 6-volt electrical system. The Farmall C weighed in at 2845 pounds and had manual band brakes, which speaks to its age and the technological standards of its production time.
Show more...

Key Specifications

Category: Row Crop

Power Output: 23

Transmission: Sliding Gear

Drive Type: 2WD

Operating Weight: 2845

Fuel Type: Gasoline

Farmall C vs. Similar Tractors

Power Output
Poor
Greater than 1% of similar tractors.
Operating Weight
Below Average
Greater than 16% of similar tractors.

Technical Specifications

Engine

Manufacturer
International Harvester
Model
C113
Cooling Type
Liquid
Cylinder Orientation
Vertical
Valve Configuration
I-head
Fuel Type
Gasoline
Induction Type
Naturally Aspirated
Cylinders
4
Displacement (ci)
113.1
Bore (in)
3
Stroke (in)
4
Rated RPM
1650
Power Output (hp)
23

Transmission

Type
Sliding Gear
Forward Gears
4
Reverse Gears
1
Total Gears
-

Dimensions

Length (in)
120.375
Width (in)
-
Height (in)
70.375
Operating Weight (lb)
2845

Power Take-Off (PTO)

PTO Type
540
PTO Speed 1 (rpm)
540
PTO Speed 2 (rpm)
-
PTO Speed 3 (rpm)
-

Miscellaneous

Chassis
4x2 2WD
Drive Type
2WD
Steering Type
Manual
Coolant Capacity (qts)
-
Front Tire Diameter (in)
-
Front Tire Width (in)
-
Rear Tire Diameter (in)
-
Rear Tire Width (in)
-
Front/Rear Rim Diameter (in)
-
Tire Type
Ag
Manufacture - End Year
1951
Hitch Type
-
Hitch Category
-
Hitch Position
-
Hitch Capacity (lb)
-
Operator Station Type
Open
Starter Type
Electric
Brake Type
Manual contracting band
Hydraulic System Type
-