This page provides a detailed comparison of the specifications for the NorTrac NT-254 and the Yanmar YM330. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
NorTrac NT-254
View tractor |
Yanmar YM330
View tractor |
|
|---|---|---|
| Images | No images available | No images available |
| Engine | ||
| Engine - Manufacturer | Jinma | Yanmar |
| Engine - Model | Y385 | 3T84A |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 3 | 3 |
| Engine - Displacement (ci) | 93.5 | 91.3 |
| Engine - Bore (in) | 3.346 | 3.31 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2350 | 2600 |
| Engine - Power Output (hp) | 25 | 33 |
| Transmission | ||
| Transmission - Type | Manual | Gear type |
| Transmission - Forward Gears | 12 | 8 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 117.8 | 104.7 |
| Width (in) | 51.1 | 57.9 |
| Height (in) | 56.6 | 59.4 |
| Operating Weight (lb) | 2514 | 2601 |
| Miscellaneous | ||
| Chassis | 4x4 MFWD 4WD | 4x2 2WD |
| Drive Type | 4WD | - |
| Steering Type | - | - |
| Coolant Capacity (qts) | 8.44 | 6.6 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | 6 (implied from "6.00-16") | - |
| Rear Tire Diameter (in) | 24 (implied from "9.5-24") | - |
| Rear Tire Width (in) | 9.5 (implied from "9.5-24") | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Ag tires | Ag |
| Manufacture - End Year | - | 1991 |
| Hitch Type | Three-Point Hitch (inferred from "Rear Type: I") | - |
| Hitch Category | - | - |
| Hitch Position | Rear | - |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | - | Open operator station |
| Starter Type | Electric (inferred from "Engine - Starter volts: 12") | Electric |
| PTO Type | - | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | - |
| Hydraulic System Type | Open Center | - |
