Comparing John Deere 4044M vs Yanmar Ex450

This page provides a detailed comparison of the specifications for the John Deere 4044M and the Yanmar Ex450. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

John Deere 4044M
View tractor
Yanmar Ex450
View tractor
Images No images available
Engine
Engine - Manufacturer Yanmar Yanmar
Engine - Model 4TNV88 -
Engine - Cooling Type Liquid-cooled liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel diesel
Engine - Induction Type - -
Engine - Cylinders 4 4
Engine - Displacement (ci) 133.6 133.6
Engine - Bore (in) 3.46 3.465
Engine - Stroke (in) - -
Engine - Rated RPM 2600 2700
Engine - Power Output (hp) 43 45
Transmission
Transmission - Type Power shuttle / Hydrostatic (Two options available) synchronized shuttle
Transmission - Forward Gears 12 (if Power shuttle) / Infinite (if Hydrostatic) 9
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 130.3 127
Width (in) - 71.89
Height (in) 100 (with ROPS) -
Operating Weight (lb) 3770 3499
Miscellaneous
Chassis 4x4 MFWD 4WD 4x4 MFWD 4WD
Drive Type MFWD (Mechanical Front Wheel Drive) -
Steering Type Power hydraulic power
Coolant Capacity (qts) 6.3 4.7
Front Tire Diameter (in) - -
Front Tire Width (in) - Unknown for standard configuration
Rear Tire Diameter (in) - 24 for Ag rear; varies for Lawn/turf & Industrial
Rear Tire Width (in) - 14.9 for Ag rear; varies for Lawn/turf & Industrial
Front/Rear Rim Diameter (in) - -
Tire Type Ag / Lawn/turf / R4 (Three options available) Agricultural (Ag), Lawn/turf, Industrial
Manufacture - End Year - -
Hitch Type Unknown (likely Three-Point given Rear Type I) Rear Type: 1
Hitch Category - -
Hitch Position Rear -
Hitch Capacity (lb) 3130 (at ends) -
Operator Station Type Two-post folding ROPS -
Starter Type Electric electric
PTO Type Independent -
PTO Speed 1 (rpm) 540 -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type Hydraulic wet disc -
Hydraulic System Type Open center open center