This page provides a detailed comparison of the specifications for the Challenger MT455B and the Valtra N111e Power Hi-Tech. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
Challenger MT455B
View tractor |
Valtra N111e Power Hi-Tech
View tractor |
|
---|---|---|
Images | No images available | |
Engine | ||
Engine - Manufacturer | Perkins Diesel | Unknown |
Engine - Model | 1104C | 44CWA |
Engine - Cooling Type | Liquid-cooled | - |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | - | - |
Engine - Fuel Type | Diesel | - |
Engine - Induction Type | - | - |
Engine - Cylinders | 4 | 4 |
Engine - Displacement (ci) | 268 | 268.6 |
Engine - Bore (in) | 4.134 | - |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 2200 | 2000 (average of 1800 and 2200 assuming a continuous range) |
Engine - Power Output (hp) | 95 | 124.4 (average of 126.1 and 120.7 assuming a continuous range) |
Transmission | ||
Transmission - Type | Selective gear fixed ratio with partial (2) range operator controlled powershift | Power Shuttle |
Transmission - Forward Gears | 16 | 24 |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | - | 48 |
Dimensions | ||
Length (in) | - | - |
Width (in) | - | 86.4 (conversion from 7.2 ft) |
Height (in) | - | 109.2 (conversion from 9.1 ft) |
Operating Weight (lb) | 8885 - 9445 | 10692.5 |
Miscellaneous | ||
Chassis | 4x2 | - |
Drive Type | 2WD | - |
Steering Type | Hydrostatic power | - |
Coolant Capacity (qts) | - | - |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | 14.9 |
Rear Tire Diameter (in) | 38 | 38 |
Rear Tire Width (in) | 18.4 | 18.4 |
Front/Rear Rim Diameter (in) | - | Unknown (assumed based on standard tire nomenclature) |
Tire Type | - | R (assumed to be Radial from 14.9R24/18.4R38) |
Manufacture - End Year | - | - |
Hitch Type | Rear Type II | - |
Hitch Category | - | - |
Hitch Position | Rear | - |
Hitch Capacity (lb) | - | - |
Operator Station Type | Open ROPS or Closed Center Load Sensing (Cab) | - |
Starter Type | Electric (12 volts) | - |
PTO Type | - | - |
PTO Speed 1 (rpm) | - | - |
PTO Speed 2 (rpm) | - | - |
PTO Speed 3 (rpm) | - | - |
Brake Type | - | - |
Hydraulic System Type | Open Center (for ROPS), Closed Center Load Sensing (for Cab) | Open Center (assumed from "Pump Flow Capacity" and "Relief Valve Pressure" data) |