This page provides a detailed comparison of the specifications for the John Deere 3020 and the Twin City MTA. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
John Deere 3020
View tractor |
Twin City MTA
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | John Deere | Minneapolis-Moline |
| Engine - Model | John Deere | KE |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | I-head |
| Engine - Fuel Type | Gasoline / Diesel / LP-gas | Distillate |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 4 | 4 |
| Engine - Displacement (ci) | 227.0 | 283.7 |
| Engine - Bore (in) | 4.25 | 4.25 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | - | 1150 |
| Engine - Power Output (hp) | - | - |
| Transmission | ||
| Transmission - Type | Partially synchronized with dry disc clutch / Full power shift with hydraulic wet disc clutch | Gear |
| Transmission - Forward Gears | 8 | 3 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 138.2 | 143 |
| Width (in) | 89.4 | - |
| Height (in) | 87.4 | 64.5 |
| Operating Weight (lb) | 7,695 / 9,495 | 4,860 |
| Miscellaneous | ||
| Chassis | 4x2 2WD | 4x2 2WD |
| Drive Type | 2WD | 2WD |
| Steering Type | Power Assist | Manual |
| Coolant Capacity (qts) | - | 24 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | 5.5 |
| Rear Tire Diameter (in) | - | 36 (assuming this is the same as the width for "Ag rear: 9.00x36") |
| Rear Tire Width (in) | - | 9 |
| Front/Rear Rim Diameter (in) | - | 28/42 (assuming this corresponds to the steel "Ag front: 28x5" and "Ag rear: 42x10") |
| Tire Type | Agricultural | Steel (assuming this type from the provided steel wheel sizes) |
| Manufacture - End Year | 1968 | - |
| Hitch Type | - | - |
| Hitch Category | - | - |
| Hitch Position | - | - |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | Open | - |
| Starter Type | Electric | - |
| PTO Type | Independent | - |
| PTO Speed 1 (rpm) | 540 / 1000 | - |
| PTO Speed 2 (rpm) | 1000 | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Differential hydraulic wet disc | - |
| Hydraulic System Type | Closed Center | - |
