This page provides a detailed comparison of the specifications for the Steiger Cougar III ST-250 and the Steiger Puma 1000. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Steiger Cougar III ST-250
View tractor |
Steiger Puma 1000
View tractor |
|
|---|---|---|
| Images | No images available | No images available |
| Engine | ||
| Engine - Manufacturer | Caterpillar | CDC |
| Engine - Model | 3306DITA | 6CTA |
| Engine - Cooling Type | Liquid-cooled | liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Diesel | diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 6 | 6 |
| Engine - Displacement (ci) | 638 | 505 |
| Engine - Bore (in) | 4.75 | 4.49 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2100 | 2100 |
| Engine - Power Output (hp) | 252.10 | 190 |
| Transmission | ||
| Transmission - Type | Manual | full power shift |
| Transmission - Forward Gears | 20 | 12 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 252 | 241.6 |
| Width (in) | 96 (tractor body) | - |
| Height (in) | 155.8 (excluding exhaust) | 129.55 (height with cab) |
| Operating Weight (lb) | 25000 | 17000 |
| Miscellaneous | ||
| Chassis | 4x4 articulated 4WD | 4x4 articulated 4WD |
| Drive Type | 4WD | 4WD |
| Steering Type | Hydrostatic power | hydrostatic power |
| Coolant Capacity (qts) | 56 | 35.2 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | 18.4 |
| Rear Tire Diameter (in) | 34 | 38 |
| Rear Tire Width (in) | - | 18.4 |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Agricultural | Ag |
| Manufacture - End Year | - | - |
| Hitch Type | Three-Point Hitch (optional) | - |
| Hitch Category | - | - |
| Hitch Position | Rear | - |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | - | Cab (assumed based on the presence of a cab height specification) |
| Starter Type | - | Electric (assumed based on Engine - Starter volts specification) |
| PTO Type | - | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | - |
| Hydraulic System Type | Open center | closed center load sensing pressure compensating |
