Comparing Massey Ferguson 5455 vs Steiger Puma 1000

This page provides a detailed comparison of the specifications for the Massey Ferguson 5455 and the Steiger Puma 1000. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Massey Ferguson 5455
View tractor
Steiger Puma 1000
View tractor
Images No images available
Engine
Engine - Manufacturer Perkins Diesel CDC
Engine - Model 1104 6CTA
Engine - Cooling Type Liquid-cooled liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel diesel
Engine - Induction Type - -
Engine - Cylinders 4 6
Engine - Displacement (ci) 268.5 505
Engine - Bore (in) 4.134 4.49
Engine - Stroke (in) - -
Engine - Rated RPM 2199 2100
Engine - Power Output (hp) 92.8 190
Transmission
Transmission - Type Selective gear fixed ratio with partial (4) range operator controlled powershift full power shift
Transmission - Forward Gears 16 with electronic control module providing additional power levels 12
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 165.7 241.6
Width (in) 79.3 -
Height (in) 108.3 129.55 (height with cab)
Operating Weight (lb) 9910 (static weight with operator), 9720 (unladen) 17000
Miscellaneous
Chassis 4x4 FWA 4x4 articulated 4WD
Drive Type 4WD 4WD
Steering Type Hydrostatic power hydrostatic power
Coolant Capacity (qts) - 35.2
Front Tire Diameter (in) - -
Front Tire Width (in) - 18.4
Rear Tire Diameter (in) - 38
Rear Tire Width (in) - 18.4
Front/Rear Rim Diameter (in) - -
Tire Type Front: Two 14.9R28; Rear: Two 18.4R38; Tire Pressures: 15 psi Ag
Manufacture - End Year 2013 -
Hitch Type Three-Point Hitch -
Hitch Category - -
Hitch Position Rear -
Hitch Capacity (lb) - -
Operator Station Type - Cab (assumed based on the presence of a cab height specification)
Starter Type Electric Electric (assumed based on Engine - Starter volts specification)
PTO Type - -
PTO Speed 1 (rpm) - -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type Open center closed center load sensing pressure compensating