This page provides a detailed comparison of the specifications for the John Deere 1010C and the Steiger Panther KP-1325. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
John Deere 1010C
View tractor |
Steiger Panther KP-1325
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | John Deere | Cummins |
| Engine - Model | John Deere 1.9L 4-cyl gasoline | John Deere 2.4L 4-cyl diesel | NTA 855 |
| Engine - Cooling Type | Liquid-cooled | liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Gasoline | Diesel | diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 4 | 6 |
| Engine - Displacement (ci) | 115.5 (gasoline) | 144.5 (diesel) | 855 |
| Engine - Bore (in) | 3.50 (gasoline) | 3.625 (diesel) | 5.5 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2500 | 2100 |
| Engine - Power Output (hp) | 40 | 325 |
| Transmission | ||
| Transmission - Type | Manual | full power shift |
| Transmission - Forward Gears | 4 | 12 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 102.1 | - |
| Width (in) | 61.1 | - |
| Height (in) | 70.9 (gasoline) | 74 (diesel) | - |
| Operating Weight (lb) | 7,580 | 35300 |
| Miscellaneous | ||
| Chassis | Crawler | 4x4 articulated 4WD |
| Drive Type | 2WD | 4WD |
| Steering Type | Multiple disc clutch and brake | articulated power |
| Coolant Capacity (qts) | - | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | - | - |
| Manufacture - End Year | 1964 | - |
| Hitch Type | - | III/IV |
| Hitch Category | - | - |
| Hitch Position | - | - |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | Open operator station | - |
| Starter Type | Electric | - |
| PTO Type | - | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Mechanical contracting band | - |
| Hydraulic System Type | - | closed center |
