Comparing Allis Chalmers 4W-305 vs Steiger Panther III PTA-310

This page provides a detailed comparison of the specifications for the Allis Chalmers 4W-305 and the Steiger Panther III PTA-310. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

Allis Chalmers 4W-305
View tractor
Steiger Panther III PTA-310
View tractor
Images No images available
Engine
Engine - Manufacturer Allis Chalmers Cummins
Engine - Model 6120T NTA-855C
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel
Engine - Induction Type - -
Engine - Cylinders 6 6
Engine - Displacement (ci) 731 855
Engine - Bore (in) 5.25 5.5
Engine - Stroke (in) - -
Engine - Rated RPM 2300 2100
Engine - Power Output (hp) 305 310
Transmission
Transmission - Type Two-speed power shift Power shift
Transmission - Forward Gears 20 10
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 285 264.5
Width (in) - 52 *
Height (in) 139 (height with cab) -
Operating Weight (lb) 27100 28400
Miscellaneous
Chassis 4x4 articulated 4WD 4x4 Articulated 4WD
Drive Type 4WD 4WD
Steering Type Hydraulic power Articulated power
Coolant Capacity (qts) 72 58
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) 38 34
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Ag Agricultural
Manufacture - End Year 1985 -
Hitch Type Rear Type: III/IV* (potentially Three-Point Hitch as common in tractors, but this is not confirmed) Rear Type III*
Hitch Category - -
Hitch Position Rear Rear
Hitch Capacity (lb) - -
Operator Station Type Cab (standard) -
Starter Type Electric Electric (12 volts)
PTO Type Independent -
PTO Speed 1 (rpm) 1000 -
PTO Speed 2 (rpm) - -
PTO Speed 3 (rpm) - -
Brake Type - -
Hydraulic System Type Closed center load-sensing Open center