This page provides a detailed comparison of the specifications for the Steiger Cougar III ST-250 and the Steiger Puma 1000. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
Steiger Cougar III ST-250
View tractor |
Steiger Puma 1000
View tractor |
|
---|---|---|
Images | No images available | No images available |
Engine | ||
Engine - Manufacturer | Caterpillar | CDC |
Engine - Model | 3306DITA | 6CTA |
Engine - Cooling Type | Liquid-cooled | liquid-cooled |
Engine - Cylinder Orientation | - | - |
Engine - Valve Configuration | - | - |
Engine - Fuel Type | Diesel | diesel |
Engine - Induction Type | - | - |
Engine - Cylinders | 6 | 6 |
Engine - Displacement (ci) | 638 | 505 |
Engine - Bore (in) | 4.75 | 4.49 |
Engine - Stroke (in) | - | - |
Engine - Rated RPM | 2100 | 2100 |
Engine - Power Output (hp) | 252.10 | 190 |
Transmission | ||
Transmission - Type | Manual | full power shift |
Transmission - Forward Gears | 20 | 12 |
Transmission - Reverse Gears | - | - |
Transmission - Total Gears | - | - |
Dimensions | ||
Length (in) | 252 | 241.6 |
Width (in) | 96 (tractor body) | - |
Height (in) | 155.8 (excluding exhaust) | 129.55 (height with cab) |
Operating Weight (lb) | 25000 | 17000 |
Miscellaneous | ||
Chassis | 4x4 articulated 4WD | 4x4 articulated 4WD |
Drive Type | 4WD | 4WD |
Steering Type | Hydrostatic power | hydrostatic power |
Coolant Capacity (qts) | 56 | 35.2 |
Front Tire Diameter (in) | - | - |
Front Tire Width (in) | - | 18.4 |
Rear Tire Diameter (in) | 34 | 38 |
Rear Tire Width (in) | - | 18.4 |
Front/Rear Rim Diameter (in) | - | - |
Tire Type | Agricultural | Ag |
Manufacture - End Year | - | - |
Hitch Type | Three-Point Hitch (optional) | - |
Hitch Category | - | - |
Hitch Position | Rear | - |
Hitch Capacity (lb) | - | - |
Operator Station Type | - | Cab (assumed based on the presence of a cab height specification) |
Starter Type | - | Electric (assumed based on Engine - Starter volts specification) |
PTO Type | - | - |
PTO Speed 1 (rpm) | - | - |
PTO Speed 2 (rpm) | - | - |
PTO Speed 3 (rpm) | - | - |
Brake Type | - | - |
Hydraulic System Type | Open center | closed center load sensing pressure compensating |