Comparing John Deere 3020 vs Steiger Cougar III ST-250

This page provides a detailed comparison of the specifications for the John Deere 3020 and the Steiger Cougar III ST-250. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

John Deere 3020
View tractor
Steiger Cougar III ST-250
View tractor
Images No images available
Engine
Engine - Manufacturer John Deere Caterpillar
Engine - Model John Deere 3306DITA
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Gasoline / Diesel / LP-gas Diesel
Engine - Induction Type - -
Engine - Cylinders 4 6
Engine - Displacement (ci) 227.0 638
Engine - Bore (in) 4.25 4.75
Engine - Stroke (in) - -
Engine - Rated RPM - 2100
Engine - Power Output (hp) - 252.10
Transmission
Transmission - Type Partially synchronized with dry disc clutch / Full power shift with hydraulic wet disc clutch Manual
Transmission - Forward Gears 8 20
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 138.2 252
Width (in) 89.4 96 (tractor body)
Height (in) 87.4 155.8 (excluding exhaust)
Operating Weight (lb) 7,695 / 9,495 25000
Miscellaneous
Chassis 4x2 2WD 4x4 articulated 4WD
Drive Type 2WD 4WD
Steering Type Power Assist Hydrostatic power
Coolant Capacity (qts) - 56
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - 34
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Agricultural Agricultural
Manufacture - End Year 1968 -
Hitch Type - Three-Point Hitch (optional)
Hitch Category - -
Hitch Position - Rear
Hitch Capacity (lb) - -
Operator Station Type Open -
Starter Type Electric -
PTO Type Independent -
PTO Speed 1 (rpm) 540 / 1000 -
PTO Speed 2 (rpm) 1000 -
PTO Speed 3 (rpm) - -
Brake Type Differential hydraulic wet disc -
Hydraulic System Type Closed Center Open center