This page provides a detailed comparison of the specifications for the John Deere 1010C and the Shibaura ST321. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
John Deere 1010C
View tractor |
Shibaura ST321
View tractor |
|
|---|---|---|
| Images | ||
| Engine | ||
| Engine - Manufacturer | John Deere | Shibaura |
| Engine - Model | John Deere 1.9L 4-cyl gasoline | John Deere 2.4L 4-cyl diesel | S773 |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Gasoline | Diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 4 | 3 |
| Engine - Displacement (ci) | 115.5 (gasoline) | 144.5 (diesel) | 61.3 |
| Engine - Bore (in) | 3.50 (gasoline) | 3.625 (diesel) | 3.03 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2500 | 2600 |
| Engine - Power Output (hp) | 40 | 21 |
| Transmission | ||
| Transmission - Type | Manual | Gear and Hydrostatic |
| Transmission - Forward Gears | 4 | 9 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 102.1 | 107.4 |
| Width (in) | 61.1 | Unknown (44.8 for Gear Width and 46.8 for Hydro Width provided) |
| Height (in) | 70.9 (gasoline) | 74 (diesel) | Unknown (90 for Gear Height and 88.2 for Hydro Heights provided) |
| Operating Weight (lb) | 7,580 | 1649 to 1662 |
| Miscellaneous | ||
| Chassis | Crawler | 4x4 MFWD 4WD |
| Drive Type | 2WD | 4WD |
| Steering Type | Multiple disc clutch and brake | Power |
| Coolant Capacity (qts) | - | 3.7 |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | 16 |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | - | Ag and Lawn/Turf |
| Manufacture - End Year | 1964 | - |
| Hitch Type | - | Category I |
| Hitch Category | - | - |
| Hitch Position | - | - |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | Open operator station | ROPS |
| Starter Type | Electric | Electric |
| PTO Type | - | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Mechanical contracting band | - |
| Hydraulic System Type | - | Open Center |
