This page provides a detailed comparison of the specifications for the Ford 820 and the Shibaura SE4040. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Ford 820
View tractor |
Shibaura SE4040
View tractor |
|
|---|---|---|
| Images | ||
| Engine | ||
| Engine - Manufacturer | Ford | Shibaura |
| Engine - Model | - | LEP854A |
| Engine - Cooling Type | - | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Gasoline, LP Gas | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 4 | 4 |
| Engine - Displacement (ci) | 172 | 130.2 |
| Engine - Bore (in) | 3.9 | 3.35 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2200 | 2500 |
| Engine - Power Output (hp) | 44 | 40 |
| Transmission | ||
| Transmission - Type | Unsynchronized Gear | Gear |
| Transmission - Forward Gears | 5 | 12 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | - |
| Dimensions | ||
| Length (in) | 113.6 | 131.5 |
| Width (in) | 64.75 | 59.8 |
| Height (in) | 55.5 | 61.8 (steering wheel) |
| Operating Weight (lb) | 3400 | 3075 |
| Miscellaneous | ||
| Chassis | - | 4x4 MFWD 4WD |
| Drive Type | - | 4WD |
| Steering Type | Manual | - |
| Coolant Capacity (qts) | 15 | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | 8 |
| Rear Tire Diameter (in) | - | 28 |
| Rear Tire Width (in) | - | 12.4 |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Ag Front: 6.00-16, Ag Rear: Unknown | Agricultural |
| Manufacture - End Year | 1957 | - |
| Hitch Type | - | Category I |
| Hitch Category | - | - |
| Hitch Position | - | Rear |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | - | - |
| Starter Type | - | Electric (12 volts) |
| PTO Type | - | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | - |
| Hydraulic System Type | - | Open center |
