This page provides a detailed comparison of the specifications for the John Deere 3020 and the Pasquali VANTH 5.40. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
John Deere 3020
View tractor |
Pasquali VANTH 5.40
View tractor |
|
|---|---|---|
| Images | No images available | |
| Engine | ||
| Engine - Manufacturer | John Deere | Lombardini |
| Engine - Model | John Deere | LDW 1404 FOCS |
| Engine - Cooling Type | Liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | Gasoline / Diesel / LP-gas | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 4 | 4 |
| Engine - Displacement (ci) | 227.0 | 83.7 |
| Engine - Bore (in) | 4.25 | - |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | - | 3400 |
| Engine - Power Output (hp) | - | 35 |
| Transmission | ||
| Transmission - Type | Partially synchronized with dry disc clutch / Full power shift with hydraulic wet disc clutch | - |
| Transmission - Forward Gears | 8 | 8 |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | 12 |
| Dimensions | ||
| Length (in) | 138.2 | - |
| Width (in) | 89.4 | - |
| Height (in) | 87.4 | - |
| Operating Weight (lb) | 7,695 / 9,495 | 1940 |
| Miscellaneous | ||
| Chassis | 4x2 2WD | 4x4 articulated 4WD |
| Drive Type | 2WD | 4WD |
| Steering Type | Power Assist | Hydrostatic power |
| Coolant Capacity (qts) | - | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | Agricultural | Agricultural |
| Manufacture - End Year | 1968 | - |
| Hitch Type | - | Category I |
| Hitch Category | - | - |
| Hitch Position | - | Rear |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | Open | - |
| Starter Type | Electric | Electric (12 volts) |
| PTO Type | Independent | - |
| PTO Speed 1 (rpm) | 540 / 1000 | - |
| PTO Speed 2 (rpm) | 1000 | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | Differential hydraulic wet disc | - |
| Hydraulic System Type | Closed Center | - |
