Comparing John Deere 7230 vs Oliver 1855

This page provides a detailed comparison of the specifications for the John Deere 7230 and the Oliver 1855. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

John Deere 7230
View tractor
Oliver 1855
View tractor
Images No images available
Engine
Engine - Manufacturer John Deere Oliver-Waukesha
Engine - Model 6068HL280 or 6068HL282 -
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Diesel Diesel or Gasoline
Engine - Induction Type - -
Engine - Cylinders 6 6
Engine - Displacement (ci) 414.4 ci 310 ci
Engine - Bore (in) 4.19 in 3.86 in
Engine - Stroke (in) - -
Engine - Rated RPM 2300 2400
Engine - Power Output (hp) 126.93 hp 98 HP (diesel) or 92 HP (gasoline)
Transmission
Transmission - Type Selective gear fixed ratio with partial (4) range operator controlled power shift (AutoQuad-Plus) Gear type with disc clutch or Partial power shift
Transmission - Forward Gears 24 6 (gear type) or 18 (Hydraul-Shift)
Transmission - Reverse Gears - -
Transmission - Total Gears 48 -
Dimensions
Length (in) 187 in 159.5 in (2WD)
Width (in) 65.4 in 80.625 in
Height (in) 115 in (ROPS) / 114.2 in (Cab) 85.5 in (steering wheel)
Operating Weight (lb) 12930 lbs (4WD Operating weight) 11,150 lbs
Miscellaneous
Chassis 4x2 2WD or 4x4 MFWD 4WD (optional) 4x2 2WD or 4x4 MFWD 4WD (optional)
Drive Type 2WD or 4WD (based on chassis specification) 2WD/4WD
Steering Type Hydrostatic power Hydrostatic power
Coolant Capacity (qts) 32.8 qts (ROPS) / 35.5 qts (Cab) 20 qts
Front Tire Diameter (in) - -
Front Tire Width (in) 15.0 in -
Rear Tire Diameter (in) 71.3 in -
Rear Tire Width (in) 18.9 in -
Front/Rear Rim Diameter (in) 30 in / 42 in -
Tire Type Ag (agricultural) Ag
Manufacture - End Year 2017 1975
Hitch Type Category II Three-Point Hitch
Hitch Category - -
Hitch Position Rear Rear
Hitch Capacity (lb) 18196 lbs 4,000 lbs (Cat I/II) or 6,000 lbs (Cat II/III)
Operator Station Type Two-post Roll-Gard ROPS or Cab (optional) Open operator station. Two-post ROPS or cab (optional)
Starter Type Electric Electric
PTO Type Independent Independent
PTO Speed 1 (rpm) 540 540
PTO Speed 2 (rpm) 1000 540/1000 (optional)
PTO Speed 3 (rpm) 540E (optional) 1000 (optional)
Brake Type Differential hydraulic wet disc Differential hydraulic disc
Hydraulic System Type Constant flow load sensing or closed-center load sensing (optional for ROPS) Closed center