Comparing John Deere 1010C vs Oliver 1855

This page provides a detailed comparison of the specifications for the John Deere 1010C and the Oliver 1855. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

John Deere 1010C
View tractor
Oliver 1855
View tractor
Images No images available
Engine
Engine - Manufacturer John Deere Oliver-Waukesha
Engine - Model John Deere 1.9L 4-cyl gasoline | John Deere 2.4L 4-cyl diesel -
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Gasoline | Diesel Diesel or Gasoline
Engine - Induction Type - -
Engine - Cylinders 4 6
Engine - Displacement (ci) 115.5 (gasoline) | 144.5 (diesel) 310 ci
Engine - Bore (in) 3.50 (gasoline) | 3.625 (diesel) 3.86 in
Engine - Stroke (in) - -
Engine - Rated RPM 2500 2400
Engine - Power Output (hp) 40 98 HP (diesel) or 92 HP (gasoline)
Transmission
Transmission - Type Manual Gear type with disc clutch or Partial power shift
Transmission - Forward Gears 4 6 (gear type) or 18 (Hydraul-Shift)
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 102.1 159.5 in (2WD)
Width (in) 61.1 80.625 in
Height (in) 70.9 (gasoline) | 74 (diesel) 85.5 in (steering wheel)
Operating Weight (lb) 7,580 11,150 lbs
Miscellaneous
Chassis Crawler 4x2 2WD or 4x4 MFWD 4WD (optional)
Drive Type 2WD 2WD/4WD
Steering Type Multiple disc clutch and brake Hydrostatic power
Coolant Capacity (qts) - 20 qts
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type - Ag
Manufacture - End Year 1964 1975
Hitch Type - Three-Point Hitch
Hitch Category - -
Hitch Position - Rear
Hitch Capacity (lb) - 4,000 lbs (Cat I/II) or 6,000 lbs (Cat II/III)
Operator Station Type Open operator station Open operator station. Two-post ROPS or cab (optional)
Starter Type Electric Electric
PTO Type - Independent
PTO Speed 1 (rpm) - 540
PTO Speed 2 (rpm) - 540/1000 (optional)
PTO Speed 3 (rpm) - 1000 (optional)
Brake Type Mechanical contracting band Differential hydraulic disc
Hydraulic System Type - Closed center