This page provides a detailed comparison of the specifications for the John Deere 5075M and the New Holland Workmaster 55. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
John Deere 5075M
View tractor |
New Holland Workmaster 55
View tractor |
|
|---|---|---|
| Images | No images available | No images available |
| Engine | ||
| Engine - Manufacturer | John Deere | ISM Diesel |
| Engine - Model | PowerTech 5030 | - |
| Engine - Cooling Type | liquid-cooled | Liquid-cooled |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | diesel | No. 2 Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 3 | 4 |
| Engine - Displacement (ci) | 179 | 135 cu·in |
| Engine - Bore (in) | 3.385 | 3.307 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2200 | 2700 |
| Engine - Power Output (hp) | 63.75 | 49.36 hp |
| Transmission | ||
| Transmission - Type | selective gear fixed ratio | - |
| Transmission - Forward Gears | 16 | - |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | 16 | 8 forward and 8 reverse (2WD), 12 forward and reverse (4WD) |
| Dimensions | ||
| Length (in) | - | 130.7 (2WD), 133.5 (4WD) |
| Width (in) | - | 67.3 |
| Height (in) | - | 95.7 |
| Operating Weight (lb) | 8265 | 4385 (Unladen tractor mass) |
| Miscellaneous | ||
| Chassis | 4x2 2WD | - |
| Drive Type | 2WD | - |
| Steering Type | hydrostatic power | Hydrostatic power |
| Coolant Capacity (qts) | 10.4 | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | - | - |
| Manufacture - End Year | - | 2014 |
| Hitch Type | II/I | Unknown (Category II/I suggests standard three-point hitch) |
| Hitch Category | - | - |
| Hitch Position | - | - |
| Hitch Capacity (lb) | - | 2580 lbs (lift capacity at ends) |
| Operator Station Type | - | Two-post foldable ROPS |
| Starter Type | Electric Starter (assumed from "Engine - Starter volts: 12") | Electric |
| PTO Type | - | Independent |
| PTO Speed 1 (rpm) | - | 540 |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | Differential mechanical wet disc |
| Hydraulic System Type | Open Center | Direct engine drive |
