This page provides a detailed comparison of the specifications for the Massey Ferguson 8280 and the New Holland T8050. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.
|
Massey Ferguson 8280
View tractor |
New Holland T8050
View tractor |
|
|---|---|---|
| Images | ||
| Engine | ||
| Engine - Manufacturer | Valmet | CNH Engine Corporation |
| Engine - Model | - | - |
| Engine - Cooling Type | liquid-cooled | Liquid-cooled with oil cooler engine coolant heat exchanger |
| Engine - Cylinder Orientation | - | - |
| Engine - Valve Configuration | - | - |
| Engine - Fuel Type | turbocharged intercooled diesel | Diesel |
| Engine - Induction Type | - | - |
| Engine - Cylinders | 6 | 6 |
| Engine - Displacement (ci) | 513.8 | 540 (8849 ml) |
| Engine - Bore (in) | 4.37 | 4.488 |
| Engine - Stroke (in) | - | - |
| Engine - Rated RPM | 2200 | 2200 |
| Engine - Power Output (hp) | 250 | 311.04 |
| Transmission | ||
| Transmission - Type | full power shift | Selective gear fixed ratio with power shift |
| Transmission - Forward Gears | 18 | - |
| Transmission - Reverse Gears | - | - |
| Transmission - Total Gears | - | 19 forward and 6 reverse |
| Dimensions | ||
| Length (in) | - | - |
| Width (in) | - | - |
| Height (in) | - | - |
| Operating Weight (lb) | 21540 | 24095 (unladen); 34500 (with ballast) |
| Miscellaneous | ||
| Chassis | 4x4 MFWD 4WD | 4x4 MFWD 4WD |
| Drive Type | 4WD | 4WD |
| Steering Type | hydrostatic power | Power |
| Coolant Capacity (qts) | 32 | - |
| Front Tire Diameter (in) | - | - |
| Front Tire Width (in) | - | - |
| Rear Tire Diameter (in) | - | - |
| Rear Tire Width (in) | - | - |
| Front/Rear Rim Diameter (in) | - | - |
| Tire Type | - | Radial |
| Manufacture - End Year | 2003 | - |
| Hitch Type | - | IVN |
| Hitch Category | - | - |
| Hitch Position | Rear | - |
| Hitch Capacity (lb) | - | - |
| Operator Station Type | - | - |
| Starter Type | Electric Starter | 12 volt electric |
| PTO Type | - | - |
| PTO Speed 1 (rpm) | - | - |
| PTO Speed 2 (rpm) | - | - |
| PTO Speed 3 (rpm) | - | - |
| Brake Type | - | - |
| Hydraulic System Type | pressure flow compensated (PFC) | - |
