Comparing John Deere 3020 vs Minneapolis-Moline UTU

This page provides a detailed comparison of the specifications for the John Deere 3020 and the Minneapolis-Moline UTU. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

John Deere 3020
View tractor
Minneapolis-Moline UTU
View tractor
Images No images available
Engine
Engine - Manufacturer John Deere Minneapolis-Moline
Engine - Model John Deere -
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Gasoline / Diesel / LP-gas Gasoline
Engine - Induction Type - -
Engine - Cylinders 4 4
Engine - Displacement (ci) 227.0 283.7
Engine - Bore (in) 4.25 4.25
Engine - Stroke (in) - -
Engine - Rated RPM - 1275
Engine - Power Output (hp) - -
Transmission
Transmission - Type Partially synchronized with dry disc clutch / Full power shift with hydraulic wet disc clutch Unsynchronized gear
Transmission - Forward Gears 8 5
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 138.2 139.5
Width (in) 89.4 84.5
Height (in) 87.4 70.5
Operating Weight (lb) 7,695 / 9,495 5500
Miscellaneous
Chassis 4x2 2WD -
Drive Type 2WD -
Steering Type Power Assist Manual
Coolant Capacity (qts) - 24
Front Tire Diameter (in) - -
Front Tire Width (in) - 6
Rear Tire Diameter (in) - 36
Rear Tire Width (in) - 11
Front/Rear Rim Diameter (in) - -
Tire Type Agricultural Ag
Manufacture - End Year 1968 -
Hitch Type - -
Hitch Category - -
Hitch Position - -
Hitch Capacity (lb) - -
Operator Station Type Open -
Starter Type Electric -
PTO Type Independent -
PTO Speed 1 (rpm) 540 / 1000 -
PTO Speed 2 (rpm) 1000 -
PTO Speed 3 (rpm) - -
Brake Type Differential hydraulic wet disc -
Hydraulic System Type Closed Center -