Comparing John Deere 3020 vs Marshall Field Marshall Series IIIA

This page provides a detailed comparison of the specifications for the John Deere 3020 and the Marshall Field Marshall Series IIIA. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

John Deere 3020
View tractor
Marshall Field Marshall Series IIIA
View tractor
Images No images available
Engine
Engine - Manufacturer John Deere Marshall
Engine - Model John Deere -
Engine - Cooling Type Liquid-cooled -
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Gasoline / Diesel / LP-gas Diesel
Engine - Induction Type - -
Engine - Cylinders 4 1
Engine - Displacement (ci) 227.0 310.4
Engine - Bore (in) 4.25 6.625
Engine - Stroke (in) - -
Engine - Rated RPM - 750
Engine - Power Output (hp) - -
Transmission
Transmission - Type Partially synchronized with dry disc clutch / Full power shift with hydraulic wet disc clutch Gear
Transmission - Forward Gears 8 6
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 138.2 -
Width (in) 89.4 -
Height (in) 87.4 -
Operating Weight (lb) 7,695 / 9,495 -
Miscellaneous
Chassis 4x2 2WD 4x2 2WD
Drive Type 2WD 2WD
Steering Type Power Assist Manual
Coolant Capacity (qts) - -
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Agricultural -
Manufacture - End Year 1968 -
Hitch Type - -
Hitch Category - -
Hitch Position - -
Hitch Capacity (lb) - -
Operator Station Type Open -
Starter Type Electric -
PTO Type Independent -
PTO Speed 1 (rpm) 540 / 1000 -
PTO Speed 2 (rpm) 1000 -
PTO Speed 3 (rpm) - -
Brake Type Differential hydraulic wet disc -
Hydraulic System Type Closed Center -