Comparing John Deere 3020 vs Landini 4-105

This page provides a detailed comparison of the specifications for the John Deere 3020 and the Landini 4-105. The specifications are categorized into four main sections: Engine, Transmission, Dimensions, and Miscellaneous. By comparing these two tractors side by side, you can easily identify the similarities and differences between them and determine which one best suits your needs.

John Deere 3020
View tractor
Landini 4-105
View tractor
Images No images available
Engine
Engine - Manufacturer John Deere Deutz
Engine - Model John Deere C4DT74
Engine - Cooling Type Liquid-cooled Liquid-cooled
Engine - Cylinder Orientation - -
Engine - Valve Configuration - -
Engine - Fuel Type Gasoline / Diesel / LP-gas Diesel
Engine - Induction Type - -
Engine - Cylinders 4 4
Engine - Displacement (ci) 227.0 219
Engine - Bore (in) 4.25 3.86
Engine - Stroke (in) - -
Engine - Rated RPM - 2200
Engine - Power Output (hp) - 101
Transmission
Transmission - Type Partially synchronized with dry disc clutch / Full power shift with hydraulic wet disc clutch Partially synchronized, power shuttle, two-speed power shift
Transmission - Forward Gears 8 24
Transmission - Reverse Gears - -
Transmission - Total Gears - -
Dimensions
Length (in) 138.2 170.1
Width (in) 89.4 68.9
Height (in) 87.4 111 (ROPS), 97.2 (cab) [Use applicable height depending on the configuration]
Operating Weight (lb) 7,695 / 9,495 7025 (ROPS), 7775 (cab) [Use applicable weight depending on the configuration]
Miscellaneous
Chassis 4x2 2WD 4x4 MFWD 4WD
Drive Type 2WD 4WD
Steering Type Power Assist Power steering
Coolant Capacity (qts) - -
Front Tire Diameter (in) - -
Front Tire Width (in) - -
Rear Tire Diameter (in) - -
Rear Tire Width (in) - -
Front/Rear Rim Diameter (in) - -
Tire Type Agricultural -
Manufacture - End Year 1968 -
Hitch Type - Three-point hitch
Hitch Category - -
Hitch Position - Rear
Hitch Capacity (lb) - -
Operator Station Type Open ROPS / Cab [Depends on configuration]
Starter Type Electric Electric
PTO Type Independent -
PTO Speed 1 (rpm) 540 / 1000 -
PTO Speed 2 (rpm) 1000 -
PTO Speed 3 (rpm) - -
Brake Type Differential hydraulic wet disc -
Hydraulic System Type Closed Center Open Center